When damage or leaks develop, the simplest and most effective remedy is to seal the area with a self-adhesive tape designed to repair roof leaks.
Winter is almost here, and for many of us the cold weather has arrived and looks like it’s here to stay. If your roof is not yet covered with a blanket of snow, now is the perfect time to seal up any areas where leaks may be present. Keeping moisture out of your home or RV will prevent unwanted damage, mold, and costly repairs.
There are several different versions of 4EvaSeal® waterproofing tape. Each is designed for a specific use or uses. So, how do you choose the right one for your application? Let’s review the product line and break down the materials that form each product to better understand how and where each version of 4EvaSeal® can be used.
Self-adhesive waterproof tapes bond to substrates with greater force when the substrates are clean and dry and the tapes are applied in warm temperatures. The greatest challenge with existing materials is always how to get them clean. Outdoor substrates collect dirt that can become embedded in the surfaces. The surfaces can also be dusty or chalky from UV exposure.
Reinforcing fabrics are regularly used with roofing, coating and waterproofing systems. They are necessary to properly detail certain conditions. However, they require extra labor and materials to install.
Reinforcing serves several purposes:
- It strengthens the roofing, coating or waterproofing over joints, seams, etc.
- It assures proper film thickness for liquid-applied materials.
- It assists in bridging gaps between materials.
Single-ply roof membranes are plastic or rubber roofing materials that consist of one thin layer of material. The most common types of single-ply roof membranes are EPDM rubber roof membranes, PVC roof membranes, and TPO roof membranes. These roofs can vary in thickness from 40 mils to 80 mils (1/16” +/-).
Waterproofing tapes are used for various applications throughout the automotive, building, and construction markets. Many of these applications require a permanent bond to the substrate to prevent water or vapor permeation, but how do you know your tape application will meet that requirement?
One way to assess the bond is by testing the tape’s peel adhesion to the substrate being used. While peel testing can help to determine compatibility between the tape and the substrate, it can also help you figure out if the surface preparation or application procedures are adequate to provide the required adhesion. Peel testing is a destructive test method. It is often used prior to the start of a project to verify that the application procedure will result in an acceptable bond and to confirm that the project requirements are met.
Winter is officially here and for many of us, the cold weather has arrived and looks like it’s here to stay. If your RV’s roof is not yet covered with a blanket of snow, now is the perfect time to seal up any areas where leaks may be present. Keeping moisture out of your RV will prevent unwanted damage, mold and other costly repairs.
There are many sealant tapes to choose from if you are you looking for a simple solution to seal a hole, seam, or tear in your single ply roof. So, the question is, how do you choose the best tape for your needs? Most are competitively priced, but do they match up qualitatively?
Topics: Winter Waterproofing
RV’s, Campers, box vans, and trailers are subject to hurricane force winds that can drive moisture through the smallest of gaps when traveling at highway speeds. Often the roofs of these structures develop leaks as the vehicle ages. 4EvaSeal Multipurpose Tape stops leaks, stays bonded, and prevents water intrusion. It is also extremely flexible and UV stable.